Loading ...
Loading ...
Loading ...
4
Figure 2-7 Drill Template for Junction Box
3. (Optional) Drill the cable hole, when the cables are
routed through the wall.
4. Take apart the junction box.
5. Align the screw holes of the camera with those on the
junction box cover. Attach the camera to the junction
box cover with three PM4 × 10 screws.
Figure 2-8 Attach Camera to Junction Box Cover
6. Secure the junction box body on the wall with three
PA4 × 25 screws (supplied).
Figure 2-9 Secure Junction Box on Wall
7. Route the cables through the bottom cable hole or
side cable hole of the junction box and connect the
cables.
8. Fix the junction box cover on its body with three PM3
× 16 L6 screws that come with the junction box.
Figure 2-10 Fix Junction Box Cover on Its
Body
9. Refer to steps 6 to 7 of 2.1.1 Ceiling/Wall Mounting of
Type I Camera to adjust the viewing angle.
2.1.4 Wall Mounting with Wall Mount
Before you start:
You need to purchase a wall mount in advance.
Type I camera wall mounting and type II camera wall
mounting are similar. Following steps take type I
camera wall mounting as an example.
Steps:
Loading ...
Loading ...
Loading ...