Loading ...
Loading ...
Loading ...
Before using for the first time en-us
13
7.5 Rack heights
Set the racks at the right height.
Appliance height 34" with silverware basket
Setting Upper rack Lower rack
1 max. ø 24cm / 9.5" 33cm / 13"
2 max. ø 26.5cm / 10.5" 30.5cm / 12"
3 max. ø 29cm / 11.5" 28cm / 11"
Before using for the first time
8 Before using for the first time
Before using for the first time
8.1 Initial use
Before the first use, or after a factory reset, you will need
to configure the settings.
Tip:Connect your appliance to a mobile device. You can
conveniently change all settings using the
HomeConnect® app.
→
"HomeConnect® quick start", Page22
Requirement:The appliance has been installed and
connected.
1.
Add rinse aid. →
Page13
2. Switch on the appliance.
3.
Set the amount of rinse aid. →
Page13
4. Add detergent.
5. Start the Program with the highest cleaning temperature
without dishware.
To remove any marks from water or other residues, we
recommend you operate the appliance without dishware
before using it for the first time.
Tip:You can change these settings and other Basic
settings →
Page20
at any time.
Rinse aid system
9 Rinse aid system
Rinse aid system
9.1 Rinse aid
For optimum drying results, use rinse aid.
Only use rinse aid intended for household dishwashers.
Adding rinse aid
If the rinse aid refill indicator lights up, fill the dispenser
with rinse aid. Only use rinse aid intended for household
dishwashers.
1. Press the catch on the lid of the dispenser for rinse aid
and lift .
1
2
2. Add rinse aid up to the max mark.
max
3. If rinse aid spills out, remove it from the tub.
Spilled rinse aid can cause excessive frothing during
the wash cycle.
4. Close the lid of the dispenser for rinse aid.
a The lid clicks into position.
9.2 Setting the amount of rinse aid
If there are streaks or water spots on dishware, change
the amount of rinse aid.
1. Press
.
Loading ...
Loading ...
Loading ...