Loading ...
Loading ...
Loading ...
17
English
IV-3. Parapet Mounting: AM-231
The screws included in the parapet set are:
Sleeve anchors 5/16" x3" 6
Hex bolts M8x25 6
Hex bolts M8x70 3
Hex lock nuts M8 6
Washers M8 15
Lock washers M8 15
978.4
665
978.4
665
65
528
Parapet
Front view
Side view
Room for routing cables
The parapet bracket is designed for installation on the inside of a parapet. Note the
following before you start to install:
1. There must be a clearance of 65mm between the upper edge of the parapet wall and
the metal bracket xed to the wall. You can ush align the upper edge of the alignment
sticker with the edge of a parapet wall.
2. At least two inches of space should be available below the parapet bracket for routing
cables.
The space requirements for a parapet mount are shown below:
The parapet wall should have a
concrete strength of 4000 PSI or higher.
Each sleeve anchor can withstand an
800kgs pull-out force.
IMPORTANT:
Loading ...
Loading ...
Loading ...