Hikvision DS-3E1524-EI Hikvision DS-3E1524-EI User Manual

Loading ...

Relate Operaons/Icons Descripon

Acons/Icons Operaon Descripon

Double click a device. Show the device type and IP, panel status, and port informaon.

Double click a line. Show transmission rate, port informaon, etc.

Right-click a device. Jump to Device Status interface. For details, see Device Status .

Show the alarm informaon and event informaon, and cancel the alarm.

Jump to Remote Conguraon interface.

Set the device as root node.

Edit the device name.

Select the path and format to export the typology.

Select IPC and current devices to show the ash of the signal transmission

between them.

4.2 Typology Sengs

Steps

1. Click on the lower-le corner to do the typology sengs.

• Set display level: 1 to 10.

• Set upstream bandwidth L1 alarm: 1% to 100%. The line will turn to yellow (busy) when the

bandwidth exceeds the threshold of L1 alarm.

• Set upstream bandwidth L2 alarm: 1% to 100%. The line will turn to red

(congeson) when

the bandwidth exceeds the threshold of L2 alarm.

2. Click OK.

Gigabit Switch Client User Manual

Loading ...

Hikvision DS-3E1524-EI 24 Port Gigabit Smart Switch