COSTWAY HW70831 Set of 2/4 Patio Dining Chair

Product's Documents

Below are documents related to this product, you can read online or download:
HW70831 photo

Installation Instructions

This is the main product document for model HW70831. Additionally, the document applies to other COSTWAY models: HW70831-4

The file format is pdf, 12 pages, you can download this manual here .

background
HW70831-4
Set of 4 Wicker Dining Chairs
Lot de 4 Chaises à Manger en Osier
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
background
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies
and children as they potentially pose a serious choking hazard.
FR
Veuillez lire attentivement toutes les instructions.
Conservez les instructions pour vous y référer ultérieurement.
Vérifiez toutes les pièces et les accessoires.
Lisez attentivement chaque étape et suivez l'ordre correct.
Nous recommandons que, dans la mesure du possible, tous les produits
soient assemblés à proximité de la zone où ils seront utilisés, afin d'éviter tout
déplacement inutile du produit une fois assemblé.
Placez toujours le produit sur une surface plane et stable.
Conservez toutes les petites pièces de ce produit et les matériaux d'emballage
hors de portée des bébés et des enfants, car ils pourraient présenter un risque
d'étouffement.
Avant de Commencer
EN
02
background
Warning
The furniture has been pre-treated to be better protected against
sun, rain, stains and other wear and tear. However, we hope you
can protect your outdoor furniture from rain, sun, dirt, dust, pollen
and snow when not in use.
How to Re-Oil Furniture
Furniture finished with oil and wax will probably not need to be
re-oiled unless it becomes dry from being stored in extreme cold or
heat, or in constant direct sunlight or other drying conditions. If your
piece does become overly dry, follow the following instructions for
re-oiling.
1.Use turpentine or naptha applied with a clean cotton cloth to
remove the existing wax. Clean the surface with water and Soap,
using only as much liquid so as to make the cloth damp, not wet.
Allow the surface to dry completely.
2.Use super-fine grade #0000 steel wool to further prepare the
surface, using light, even pressure and always working with the
wood grain.
3.Apply a liberal amount of oil to the surface. We use a blend of 1/3
boiled linseed oil, 1/3 pure tung oil and 1/3 oil-based polyurethane
(Allow the oil to soak into the wood for about 10 to 15 minutes.)
4.Wipe off all excess oil using a clean cotton cloth. Allow the newly
oiled furniture to set for at least 24 hours.
5.To prepare for waxing, clean the surface with super-fine #0000
grade steel wool. Carefully wipe the surface clean with a soft cotton
cloth to remove all grit and residue.
6.If the wood still appears dry, you may re-apply oil and repeat the
steps 3 through 5.
Important safety note: Handle oily rags with caution, as there
is a risk of spontaneous combustion if they are stored improperly. Be
sure to spread oily rags flat and allow them to dry completely, after
which they can be discarded or washed.
03
background
4
5
1
2
3
6
6
04
background
1 x4
Right Leg Frame
Cadre du pied droit
2 x4
Left Leg Frame
Cadre du pied gauche
3 x4
Backrest
Dossier
4 x4
Seat
Siège
5 x4
Cushion Seat
Coussin de siège
6 x8
Armrest
Accoudoir
C
M6x40mm Bolts
Boulon M6x40mm
x8
B
M6x25mm Bolts
Boulon M6x25mm
M6x20mm Screw
Vis M6x20mm
x8
A
M6x35mm Bolts
Boulon M6x35mm
x28
E
M4 Allen key
Clé Allen M4
x4
D
x16
Part List/Liste des Pièces
05
background
100%
D x16
1
X4
6
6
1
2
D
D
D
D
06
background
2
X4
A x4
50% 100%
50%
4
A
3
07
background
08
C
B
B
A
A
A
A
A
A
1
2
3
X4
A x24
B x8
C x4
50% 100%
50%
background
09
4
100%
C x4
X4
C
100%
5
5 X4
background
10
6 Finished/Terminé
X4
background
11
Instructions De Retour / Réclamation De Dommages
Dans le cas où un retour est requis, l'article doit être retourné dans sa boîte
d'origine. Sans cela, votre retour ne sera pas accepté.
NE PAS jeter la boîte/l'emballage d'origine.
Prenez une photo des marquages de la boîte.
Prenez une photo des dommages (le cas échéant).
Envoyez-nous un e-mail avec les images demandées.
Une photo des marquages (texte) sur le côté de la boîte est requise au cas où
une pièce serait nécessaire pour le remplacement. Cela aide notre personnel à
identifier votre numéro de produit pour s'assurer que vous recevez les bonnes
pièces.
Une photo des dommages est toujours requise pour déposer une réclamation et
obtenir rapidement votre remplacement ou votre remboursement. Assurez-vous
d'avoir la boîte même si elle est endommagée.
Envoyez-nous un e-mail directement depuis le marché où votre article a été
acheté avec les images ci-jointes et une description de votre réclamation.
FR
In case a return is required, the item must be returned in original box. Without this
your return will not be accepted.
DO NOT discard the box / original packaging.
Take a photo of the box markings.
Take a photo of the damaged part (if applicable).
Send us an email with the images requested.
A photo of the markings (text) on the side of the box is required in case a part is
needed for replacement. This helps our staff identify your product number to
ensure you receive the correct parts.
A photo of the damage is always required to file a claim and get your replacement
or refund processed quickly. Please make sure you have the box even if it is
damaged.
Email us directly from marketplace where your item was purchased with the
attached images and a description of your claim.
EN
Return / Damage Claim Instructions
Instructions De Retour / Réclamation De Dommages
background
If you're having difficulty, our friendly
customer team is always here to help.
USA office: Fontana
AUS:cs.au@costway.com
GBR:cs.uk@costway.com
FRA:cs.fr@costway.com
GBR office: FDS Corporation Limited,Unit 4, Blackacre Road, Great Blakenham,Ipswich, Ip6 0FL,United Kingdom
AUS office: Truganina FRA office: Saint Vigor d'Ymonville

Specifications

COSTWAY HW70831 Questions and Answers