PowerSmart PS76174 20V LED Work Light w/ 90° Pivoting HeadTool Only

User Manual - Page 9

For PS76174.

PDF File Manual, 18 pages, Read Online | Download pdf file

PS76174 photo
Loading ...
Loading ...
Loading ...
9
Proper care for battery
Off-season storage
To obtain the longest possible battery life, we suggest the following:
Remove the battery pack from the charger once it is fully charged and ready for use.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 80°F and away from moisture.
Store battery packs in a fully charged condition.
Every two months of storage, charge the pack as normal.
Charger safety rules
Charge the battery in a dry area that is protected from the weather. Do not expose the flashlight or the
charger to rain. Do not charge the battery in a wet location. Operate the battery charger in
temperatures between 45° and 104°F. In order to reduce the risk of electric shock, use only the charger
that is provided by the manufacturer to charge the battery.
DO NOT ABUSE THE CHARGE CORD. Never carry the charger by the cord. Do not disconnect the
charger from the outlet by pulling the charger cord.
Do not use a damaged charger. Replace the charger cords or the charger immediately.
Keep the flashlight and the charger away from water, heat sources (radiators, heaters, stoves,etc.),
flames, and chemicals.
Make sure the battery pack is secured in the charger before beginning operation.
The battery pack will become slightly warm to the touch while charging. This is normal and does not
indicate a problem.
Do not place the charger and battery pack in an area of extreme heat or cold. They will work best at
normal room temperature.
When batteries become fully charged, unplug the charger from the power supply and remove the
battery pack.
WARNING: When transporting or servicing unit, always remove the battery.
SERVICE
Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may
create a risk of electric shock or injury.
Loading ...
Loading ...
Loading ...