Loading ...
Loading ...
Loading ...
Chapter 38 PoE Setup
XGS2220 Series User’s Guide
288
38.3 PoE Time Range Setup
Use this screen to apply a schedule to the ports on the Switch. You must first configure a schedule in the
SYSTEM > Time Range screen.
Figure 213 PORT > PoE Setup > PoE Time Range Setup (Standalone Mode)
Figure 214 PORT > PoE Setup > PoE Time Range Setup (Stacking Mode)
The following table describes the labels in this screen.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 133 PORT > PoE Setup > PoE Setup (continued)
LABEL DESCRIPTION
Table 134 PORT > PoE Setup > PoE Time Range Setup
LABEL DESCRIPTION
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot number of the
Switch in a stack.
Port The port number identifies the port you are configuring. In stacking mode, the first number
represents the slot ID and the second one is the port number. Please note that the default
stacking ports (the last two ports of your Switch) cannot be configured. They are reserved for
stacking only.
Time Range
Profiles
This field displays the name of the schedule which is applied to the port.
PoE is enabled at the specified time or date.
Loading ...
Loading ...
Loading ...