Loading ...
Loading ...
Loading ...
LED Poster Display Installation Guide
8
Figure 2-8 Install Modules (Mobile Base)
2.2.3 Tilt Bracket Type
Steps
1. Install connectors. Use three M3 screws and two M3 screws respectively to fix the upper and
lower connectors to the back decoration board of the cabinet.
Figure 2-9 Install Connectors (Tilt Bracket)
Note
The second and fourth pairs of reserved holes are used for tilt bracket installation. For details,
see 2.2.1 Installation Holes.
2. Install the tilt bracket. Install the tilt bracket to the connectors and fasten the limit screws.
Loading ...
Loading ...
Loading ...