Loading ...
IMPORTANT SAFETY INSTRUCTIONS:
WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL OF THESE INSTRUCTIONS BEFORE USING.
WARNING – TO REDUCE THE RISK OF BURNS, FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS:
• Before installation, maintenance, or repair, the equipment must be disconnected from the power supply.
• Do not use this product if the power cord or plug is damaged or if the plug becomes loose after plugging
it in. Otherwise, this may cause an electrical shock, a short circuit, a fire, or other accidents to happen.
• Do not damage, or excessively bend, stretch, twist, bind, press, or squeeze the power cord. Otherwise,
this may cause a fire, an electrical shock, a short circuit, or other accidents to occur.
• In case of a damaged power cord, replacement must be performed by a technician of the manufacturer
and its maintenance department or a similar department specialist to prevent any dangerous situations.
• Only single-phase alternative current may be used. Otherwise, this may cause a fire, an electrical shock,
and other accidents to happen.
• No modifications are permitted. Persons who are not maintenance technicians are not permitted to
dismantle and repair this product. Otherwise, this may cause a fire, an electrical shock, or other injury to
occur. Please contact the technical service center for repair services.
• For replacing filtration materials, moving, or cleaning the machine, the power must be off and the power
cord must be unplugged from power sources.
• Do not connect or disconnect the power plug with wet hands, as this may cause an electrical shock and injury.
• When disconnecting the plug, the plug must be held firmly. The power cord must never be pulled, as
this may cause an electrical shock, a short circuit, a fire, or other accidents to happen. If this product
is not in use for a long period of time, the power plug must be disconnected. Otherwise, the insulating
properties may decline and result in an electrical shock and leakage, a fire, or other accidents to occur.
• Move the air purifier to a level, flat surface to prevent it from being at an angle.
• Don’t use the air purifier in highly moist conditions, as this may impair the service life of the air purifier.
• The air purifier is designed for indoor use only. Avoid any locations that may be exposed to rain, water,
and outdoor conditions.
• Do not place the machine near highly humid or moist areas such as a bathroom or where a humidifier is
present, as it is susceptible to moisture and doing so may cause an electrical shock or a malfunction.
• During installation, keep the space in front of the equipment clear of any obstructions for access in order
to repair and maintenance the unit.
• To ensure the machine is running properly and quietly, place the equipment on a stable, level, and flat
surface.
Loading ...
Loading ...
Loading ...