Loading ...
Loading ...
Loading ...
50
en |
Troubleshooting and FAQ
RE3 UHF
Wireless
2018
-12 | 01 | F.01U.362.808 Installation manual Electro-
Voice
11 Troubleshooting and FAQ
11.1 Troubleshooting
Unpredictable battery
consumption.
Poor quality or stale batteries.
Fresh battery life should be >8
hours. Use fresh, good quality
alkaline batteries for longest
battery life. Transmitter output
power will affect battery
consumption as high power
setting uses more current.
Receiver will not turn
on.
Power supply not plugged in.
Ensure power supply is plugged
into AC power, and its DC
connector is fully plugged into
receiver DC input jack.
DC power distribution cable
from AASP splitter not properly
connected (if used).
Ensure DC distribution cable is
fully plugged into receiver DC
input jack and the other end is
fully plugged into an AASP DC
output jack.
AC mains circuit is off.
Ensure AC circuit is live by testing
another AC powered item. If
necessary, locate and reset circuit
breaker.
Power button may be damaged.
The RE3 receiver power button is
robust and durable, and is unlikely
to fail. If other listed resolutions do
not solve the problem contact
your local Electro-Voice service
center.
Transmitter will not turn
on.
Dead batteries.
Replace with fresh, high-quality
alkaline batteries.
Battery polarity reversed.
Ensure battery + and - ends are in
contact with the like-marked
battery compartment contacts.
Power button may be damaged.
RE3 transmitter power buttons are
robust and durable, and are
unlikely to fail. If properly-inserted
and known-to-be-fresh batteries
will still not turn on transmitter,
contact your local Electro-Voice
service center.
Symptom Possible cause Possible resolution
Transmit power too low.
Set transmitter power to high setting.
Loading ...
Loading ...
Loading ...