ANTI-SLIP HANDLING GLOVES (X-LARGE) -
PAIR
MODEL NO: SSP33
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. INTRODUCTION
Size: X-Large. Spun nylon gloves with interlocking criss-cross coating.
Ideal for handling cartons, glass and other items with a sheer nish.
Conforms to BS EN 420:2003 + A1:2009.
Conforms to BS EN 388:2016 Level 113XX.
2. SPECIFICATION
Harmonised Standards reference: EN388:2016, EN420:2003+A1:2009
Use and performance: These gloves are suitable for protection against mechanical risk as per test standard 113XX ISO 7000-2490
Notied body:
0075
CTC 4 Rue Herman Frankel 69367 Lyon
France
Type examination certicate number:
0075/1951/162/10/192956
Declaration of Conformity can be aquired at: www.sealey.co.uk
3. PROTECTION LIMIT
3.1. Users should be warned that gloves should not be worn where there is a risk of entanglement by moving parts of machines.
3.2. Glove does not contain any substances at levels that are known to, or suspected to, adversely aect user hygiene of health.
3.3. Protection against risks or hazards which are not mentioned in this document is not warranted.
3.4. Performance levels mentioned are only valid for the palm of the glove.
3.5. Performance levels mentioned are only valid for new gloves, not washed, nor regenerated.
3.6. These levels of performance are obtained from tests done according to conditions dened in the applicable standards.
3.7. This glove shall not be in contact with re.
3.8. Before use, the glove shall be visually controlled, in case of deterioration the gloves must be scrapped (abrasion, cut, tear etc.)
3.9. For gloves with dierent layers of material, the performance levels are warranted only for the whole glove.
4. STORAGE & CLEANING NOTICE
4.1. Keep in its original packaging,store in a clean dry location. Clean in warm soapy water if required.
SSP33 Issue 1 28/03/23
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Abrasion resistance 1 Out of 4
Blade cut resistance 1 Out of 5
Tear resistance 3 Out of 4
Puncture resistance X Out of 4
Cut resistance method (ENISO
13997)
X (A to F)
Impact protection
