Loading ...
Loading ...
Loading ...
7
English
Below is a general, sample procedure using a Wall mount bracket:
1. Locate the position where you want to install the wall mount bracket and camera. Drill
holes on the wall for securing the bracket and for routing the cables.
Secure the bracket by hammering anchors into the wall and then fasten screws through
it.
2. Route power lines and other cables through the wall and the bracket.
3. Attach the mounting adapter to the bracket by rotating it clockwise until it is tightly
fastened.
1
2
3
4
55
6
4. Use the included hex wrench to secure the mounting adapter to the wall mount bracket.
5. For models using the A holes (please refer to the mounting hole diagram on the previous
page), secure its mounting plate to the mounting adapter above.
For the indoor models, mounting plates are not necessary.
6. For outdoor models - secure the camera to the mounting plate.
For indoor models -secure the camera directly to the mounting adapter.
When cabling is done, proceed with initial setup such as enabling network access, focus
tuning, or zooming. When done, secure the outer dome cover.
Cables
Wall mount
bracket
Mounting adapter
Mounting plate
Dome camera
IMPORTANT:
Wall Mount Installation
The screws and mounting surface must
be able to support a weight of 6 kg.
Loading ...
Loading ...
Loading ...