Loading ...
Loading ...
Loading ...
18
Chapter 4 Network Settings
After the power is on and the device is connected to the network, enter the IP address, activate the device and
enter the page of network settings.
1
Alarm threshold: the lower the value, the higher the ability of metal detection.
2
Working frequency: set the working frequency of the coil. When there are multiple devices working
side by side, make sure the frequency between each gate is different.
3
Automatic frequency setting: set the function of automatic frequency. After enabling, the gate will
choose the frequency to configure automatically.
4
Alarm tone: set the sound effect of the alarm.
5
Alarm volume: set the volume of the alarm.
6
Alarm duration: set the length of the alarm.
7
Detection area: set the detection area of the gate.
8
Quick scene: after enabling, the gate will set sensitivity based on quick scenario system.
9
Pass direction: set the pass direction of the gate. The side without LCD screen will be taken as the
forward direction by default.
10
Automatic clearing: configure whether to clear the count automatically after powering on.
11
Intrusion alarm: configure whether to enable intrusion alarm. After enabling, if the metal enters the
gate before the detection process is finished, the intrusion alarm will be triggered.
12
Casting Metal Mode: configure whether to enable casting metal detection, which is to link with
infrared for metal detection.
13
Random alarm: configure whether to enable random alarm. After enabling, if there is no alarm after
multiple people passing, a random alarm will be triggered when next person passes.
14
Alarm output: configure metal alarm linking alarm output, which can be linked with peripheral
devices such as turnstile.
Loading ...
Loading ...
Loading ...