Loading ...
Loading ...
Loading ...
8. Fix the gang box onto the junction box cover with
PA4 × 10 screws that come with the junction box.
9. Connect the power cord and video cable and put
the cables back into the junction box.
10. Press the camera base to the gang box. Turn the
camera clockwise until it snaps into the gang box.
11. Refer to step 6 of 2.4.1 Ceiling Mounting Without
Junction Box to adjust the angle and finish the
installation.
Figure 2-19 Finish the Installation
2.3.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill Φ 10 mm screw holes in the wall where you
want to install the wall mount.
2. Use M6 × 75 metal expansion bolts to fix the wall
mount onto the wall.
Figure 2-20 Fix the Wall Mount
3. Use PM4 × 10 screws to fix the gang box onto the
wall mount.
Figure 2-21 Fix the Gang Box
4. Repeat the step 4 to 6 of 2.4.1 Ceiling Mounting
Without Junction Box to finish the installation.
Figure 2-22 Finish the Installation
Loading ...
Loading ...
Loading ...