Loading ...
Loading ...
Loading ...
Before using for the first time en
9
6.3 Removing Twist Pad®
You can remove the rotary knob from the cooking zone
during the cooking process.
If you remove the rotary knob, the Pause function is
switched on for 10 minutes. →Page16 If you do not
reset the rotary knob to its position before this time
elapses, the hob switches off.
WARNING‒Risk of fire!
If you place a metal object on the area of the rotary
knob during these 10 minutes, the cooking zone may
continue to heat up.
▶ Always switch off the cooking zone at the main
switch.
6.4 Operation without rotary knob Twist
Pad®
If you lose the rotary knob, or in other situations, you
can operate the hob without the TwistPad®. Proceed
as follows:
1.
Use to switch on the hob.
2.
Within the next 5 seconds, press and hold and
at the same time for 4 seconds. A warning tone
sounds and lights up.
3.
Press repeatedly until the display for the required
hob lights up.
4.
Then set the required power level using or .
a The cooking zone is switched on and heats up.
Notes
¡ In this mode, only the basic function for the hotplate
is available.
¡ You can always position the rotary knob in the pro-
gramming zone again.
Before using for the first time
7 Before using for the first time
Observe the following recommendations.
7.1 Initial cleaning
Remove any leftover packaging from the hob surface
and wipe the surface with a damp cloth. You can find a
list of recommended detergents on the official website
www.neff-international.com.
More information on care and cleaning. →Page21
7.2 Cooking with induction
In comparison to conventional hobs, induction techno-
logy brings with it a series of changes and has a num-
ber of benefits such as time savings when cooking and
frying, energy savings as well as greater ease of clean-
ing and care. It also offers improved heat control as the
heat is generated directly in the cookware.
7.3 Cookware
You can find a list of recommended cookware on the
official website www.neff-international.com.
Further information on suitable cookware. →Page5
7.4 Setting Home Connect
When you first switch on the appliance, you will be
prompted to set your home network. lights up for a
few seconds on the display panel.
To begin the connection to Home Connect, touch
and proceed in accordance with the information in the
section
→"HomeConnect ", Page18.
To end the setting, switch off the hob.
You can also adjust the HomeConnect setting at a dif-
ferent time.
Software update
8 Software update
If the appliance is connected to HomeConnect, some
functions may be available with a software update.
More information on the availability of additional func-
tions can be found on the website www.neff-interna-
tional.com
Basic operation
9 Basic operation
9.1 Switching on the hob
▶
Press
.
The symbols for the cooking zones and the cur-
rently available functions light up.
a The hob is ready to use.
ReStart
▶
If you switch the appliance on within four seconds of
switching it off, the hob operates with the settings
that were previously set.
9.2 Switching the hob off
▶
Touch
until the displays go out.
a All cooking zones are switched off.
Note:If all of the cooking zones are switched off for
longer than 59seconds, the hob is automatically
switched off.
Loading ...
Loading ...
Loading ...