Falcon CLA90FXEIMG-BR Classic FX 90cm Induction Freestanding Oven/Stove Mineral Green

User Manual - Page 16

For CLA90FXEIMG-BR.

PDF File Manual, 48 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
12
Child Lock,
To prevent the unwanted use by children, the hob can be
locked.
n
IMPORTANT: This can only be activated when all the
cooking zones are switched o.
To lock the hob, simultaneously turn the two left-hand
controls counter-clockwise (Fig. 2.7) and hold until the
symbol appears in the centre of the hob control display (Fig.
2.8).
NOTE: [A ] will ash when locking the hob – this is normal.
Locking the hob will NOT aect the oven; it can still be used.
To unlock the hob, simultaneously turn the two left-hand
controls counter-clockwise and hold until the
symbol
disappears from the centre of the hob control display.
Low Temperature Setting, L1/L2
Each cooking area is equipped with 2 low temperature
settings:
L1 will maintain a temperature of about 40 °C – ideal for
gently melting butter or chocolate.
L2 will maintain a temperature of about 90 °C – ideal for
simmering (bring the pan to the boil and then select L2
to keep soups, sauces, stews, etc at an optimal simmer).
The maximum time this setting can be used is 2 hours, after
which the hob will switch o automatically. If required, you
can immediately restart the Low Temperature function by
reactivating L1 or L2.
Power Boost Setting, P
All of the induction cooking zones have Power Boost
available, activated by turning the control knob clockwise
until [ P ] is shown on the hob control display.
Power Boost allows additional power to be made available for
each of the cooking zones. This is useful to bring a large pan
of water to the boil quickly.
The Power Boost function operates for a maximum of 10
minutes on each zone, after which the power is automatically
reduced to setting 9.
When using the Power Boost function, the cooking zones are
linked.
Fig. 2.9 shows the hob layout. Zones A and B are linked
together as are zones C, D and E.
This means that when using zone A on Power Boost and then
switching zone B to power boost, then the power to zone A
will reduce slightly. The last zone switched to Power Boost
always takes priority. Zones C, D and E work in the same way.
n
This is a built in safety device.
Deactivate the Power Boost function by turning the control
knob to a lower setting.
ArtNo.326-0009 - Albertine SC - MF oven elements EU
C
A
B
A – Grill elements, B – Convection element, C – Base heat elements
Induction
A B
C
D
E
A & B linked
C, D & E linked
Fig. 2.9
Fig. 2.10
Loading ...
Loading ...
Loading ...