Loading ...
Loading ...
Loading ...
4. When all LEDs on the battery come on, the battery is
fully charged.
5. To disconnect the battery charger from the mains
socket, pull the plug. Do not pull the cable.
6. Remove the battery from the battery charger.
Note: Refer to the battery and battery charger
manuals for more information.
To connect the battery to the product
WARNING: Only use Husqvarna
original batteries with the product.
1. Make sure that the battery is fully charged.
2. Push the battery into the battery holder of the
product. The battery locks into position when you
hear a click.
CAUTION: If the battery does not
move easily into the battery holder, the
battery is not installed correctly. This can
cause damage to the product.
3. Make sure that the battery is installed correctly.
Battery information
Refer to the operator's manual of the battery for
information about how to use the battery.
To start the product
1. Push and hold the start/stop button until the green
LED comes on.
2. Use the power trigger to control the speed.
To start the SavE function
The product has a power saving function. The SavE
function gives the longest operation time from the
battery.
1. Push the SavE button to start the function. The
green LED comes on to show that the function is
on.
2. Push the SavE button again to stop the SavE
function.
Automatic shutdown function
The product has a shutdown function that stops the
product if it is not used. The green LED for start/stop
indication goes off and the product stops after 60
seconds.
To operate the product
To trim the grass
1. Hold the trimmer head immediately above the
ground at an angle. Do not push the trimmer line
into the grass.
795 - 007 - 06.05.2022
19
Loading ...
Loading ...
Loading ...