Loading ...
Loading ...
Loading ...
MAINTAINING YOUR 3-IN-1 CLEANER
5. After cleaning the dirty water tank and the solids
separator, allow them to air-dry in a well-ventilated
area for at least 24 hours. To reinstall the tank, insert
the bottom into the opening in the main body, then
tilt the tank back until it clicks into place.
5
1. Turn o the power.
2. Remove the brushroll cover, brushroll, and dirty
water tank.
3. Check the openings and remove all debris.
4. When finished, reinstall the brushroll and the cover.
CHECKING FOR BLOCKAGES
If you run over a hard or sharp object or notice a noise change while using your unit, check for blockages or
objects caught in the brushroll, nozzle chamber, or inlet hose.
MAINTAINING YOUR 3-IN-1 CLEANER
NOTE: If 3-in-1 Cleaner still does not operate properly, contact Customer Service at +44 (0)800 862 0453 or
www.sharkclean.co.uk
ORDERING REFILLS AND PARTS
Replace the filter and brushroll every 6 months.
Only use Shark HydroVac Concentrate or water with the Shark HydroVac.
To order brushrolls, filters, Shark HydroVac Multi-Surface Concentrate,
please visit sharkclean.co.uk or scan the QR code below.
sharkclean.co.uksharkclean.co.uk
Loading ...
Loading ...
Loading ...