DS-KD9203-MFTE6 User Manual

Loading ...

Figure 7-16 Elevator Control

Check to enable elevator control funcon.

Select an Elevator No., and select an elevator controller type for the elevator.

Set the Negave Floor.

Select the Interface Type as RS-485 or Network Interface. And enable the elevator control.

If you select RS-485, make sure you have connected the door staon to the elevator controller

with RS-485 wire.

If you select Network interface, enter the elevator controller's IP address, port No., user

name, and password.

Click Save to enable the sengs.

Note

●

Up to 4 elevator controllers can be connected to one door staon.

●

Up to 10 negave oors can be added.

●

Make sure the interface types of elevator controllers, which are connected to the same door

staon are consistent.

RS-485 Sengs

Set the working mode to linked device.

Steps

Click Access Control → RS-485 to enter the sengs page.

Video Intercom Face Recognion Door Staon User Manual

Loading ...

Hikvision DS-KD9203-MFTE6 Facial Recognition Door station