Loading ...
Loading ...
Loading ...
www.PyleUSA.com
8
IF THERE IS LOW (OR NO) BASS OUTPUT:
• Make sure the connections to the left and right “speaker Inputs” have the
correct polarity (+ and -).
• Consider adding a powered subwoofer to your system.
• In Dolby Digital or DTS modes, make sure your receiver/processor is
corectly congured. When using a subwoofer, make sure the subwoofer
output of the receiver/processor has been enabled. If no subwoofer is
being used, make sure the left and right front and rear speakers have
been congured as “LARGE” See your receiver/processor’s owner’s manual
for futher information on correct speaker conguration in Dolby Digital,
DTS and other surround sound modes.
IF THE SYSTEM PLAYS AT LOW VOLUME BUT SHUTS OFF AS VOLUME IS
INCREASED:
• Check all wires and connections between receiver/amplier and
speakers. Make sure all wires are connected. Make sure none of the
speaker wires are frayed, cut, punctured or touching each other.
• If more than one pair of main speakers is being used,check the minimum
-impedance requirements of your receiver/amplier.
PDICBT57 - PDICBT67 - PDICBT87
Wireless BT Streaming Wall / Ceiling Speaker System
MODEL PDICBT57 PDICBT67 PDICBT87
Sound System
5.25’’ Speaker
+ 1’’ Tweeter
6.5’’ Speaker
+ 1’’ Tweeter
8.0’’ Speaker
+ 1’’ Tweeter
MAX Power
Output
240 Watt 300 Watt 400 Watt
Eciency 86dB 88dB 90dB
Frequency
Response
100Hz-20kHz 70Hz-20kHz 50Hz-20kHz
Total Speaker
Size
7.8’’ Diameter,
3.0’’ Depth
9.4’’ Diameter,
3.9’’ Depth
10.7’’ Diameter,
4.6’’ Depth
Cut-Out Size
7.0’’ Diameter,
2.9’’ Depth
7.9’’ Diameter,
3.7’’ Depth
9.6’’ Diameter,
4.4’’ Depth
Loading ...
Loading ...