Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us !
Do NOT return this item.
TV Stand
HV10056
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
US:cs.us@costway.com
UK:cs.uk@costway.com
US office: Fontana UK office: Ipswich AU office: Truganina
03
Before You Start
02
Read each step carefully before starting. It is very important
to ensure each step followed in correct order, otherwise
assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw
edges. Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to
where the unit will be used.
Keep the handtools close at hand. Do not use power tools to
assemble your furniture. They may scratch or damage the
parts.
Minifix
Hinges 262 IN
1
5
9
2
6
3
7
4
8
Wood dowel
M8 x 30mm
CSK Screw
M3.5 x 16mm
CSK Screw
M4 x 32mm
Handle screw
M3.5 x 12mm
Power nail 3/4 Leg
Iron plate (Leg)
14 sets X9 X4 X26
X10
X5
X20 X25 X5
No. Part Qty
A Top 1
B Bo�om 1
C Side panel 2
D Shelf 1
E Center panel 3
F Door 2
G Back panel 2
Important note :
-Place all wooden parts on a clean and smooth surface to avoid the
parts from being scratched.
-Keep all hardware part out reach of children.
03
Before You Start
02
Read each step carefully before starting. It is very important
to ensure each step followed in correct order, otherwise
assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw
edges. Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to
where the unit will be used.
Keep the handtools close at hand. Do not use power tools to
assemble your furniture. They may scratch or damage the
parts.
Minifix
Hinges 262 IN
1
5
9
2
6
3
7
4
8
Wood dowel
M8 x 30mm
CSK Screw
M3.5 x 16mm
CSK Screw
M4 x 32mm
Handle screw
M3.5 x 12mm
Power nail 3/4 Leg
Iron plate (Leg)
14 sets X9 X4 X26
X10
X5
X20 X25 X5
No. Part Qty
A Top 1
B Bo�om 1
C Side panel 2
D Shelf 1
E Center panel 3
F Door 2
G Back panel 2
Important note :
-Place all wooden parts on a clean and smooth surface to avoid the
parts from being scratched.
-Keep all hardware part out reach of children.
04 05
1-Install the center panel on the shelf panel. Then place the center
panel and side panel on the bottom panel.
F
A
B
D
E
C
G
E
D
1
2
x14
x5
5
x10
M4*32mm
E
C
B
5
10x
04 05
1-Install the center panel on the shelf panel. Then place the center
panel and side panel on the bottom panel.
F
A
B
D
E
C
G
E
D
1
2
x14
x5
5
x10
M4*32mm
E
C
B
5
10x
06 07
2-Install the top panel. 3-Install the door panel with hinges and back panel with power nail.
top panel
(back side)
A
G
7
25x
F
1
2
x10
x4
3
x4
4
x16
M3.5*16mm
7
x25
06 07
2-Install the top panel. 3-Install the door panel with hinges and back panel with power nail.
top panel
(back side)
A
G
7
25x
F
1
2
x10
x4
3
x4
4
x16
M3.5*16mm
7
x25
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the
finish.
Liquid spills should be removed immediately. Using a soft clean cloth, blot
the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood.
It is advised to keep furniture away from direct sunlight as sun may
damage the finish.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture as it
ages.
Further advice about wood
furniture care
08 09
4-Install the leg at the bottom and make
sure the iron plate has been installed on
the wooden leg after installation.
Complete Assembly
4
9
8
10x
6
4
x10
x5
x5
6
8
9
x20
M3.5*12mm
M3.5*16mm
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the
finish.
Liquid spills should be removed immediately. Using a soft clean cloth, blot
the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood.
It is advised to keep furniture away from direct sunlight as sun may
damage the finish.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture as it
ages.
Further advice about wood
furniture care
08 09
4-Install the leg at the bottom and make
sure the iron plate has been installed on
the wooden leg after installation.
Complete Assembly
4
9
8
10x
6
4
x10
x5
x5
6
8
9
x20
M3.5*12mm
M3.5*16mm
Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us !
Do NOT return this item.
TV Stand
HV10056
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
US:cs.us@costway.com
UK:cs.uk@costway.com
US office: Fontana UK office: Ipswich AU office: Truganina
