Loading ...
Loading ...
Loading ...
11 | ASSEMBLING THE BIKE
A × 4
A × 4
6mm
6mm
ASSEMBLING THE BIKE
ADDING THE STABILIZERS
1 Fit the front stabilizer tightly against the front foot of the Bike.
Note: Make sure you have the correct stabilizer. The front stabilizer has wheels
and the rear stabilizer does not.
2 Using the 6mm Allen wrench and (4) bolts A, secure the front stabilizer to the
foot of the Bike. Make sure you fully tighten all four bolts.
3 Fit the rear stabilizer onto the back foot of the Bike.
4 Using the 6mm Allen wrench and (4) bolts A, secure the back stabilizer to the
foot of the Bike. Make sure you fully tighten all four bolts.
CAUTION: Make sure all bolts are tight before moving to the next step.
Shake each stabilizer to make sure it is held securely against the frame. If
there is any movement, tighten each bolt again.
5 Carefully lift the Bike and set it upright.
PARTS AND TOOLS
Loading ...
Loading ...
Loading ...