GE - General Electric IWA10KS30 Window Air Conditioner with 10000 Cooling BTU, 450 sq. ft. Cooling Area, 3 Cooling Speed, Remote Controller, 115 Volts, 12 EER Auto Restart, Digital LED Display, Programmable 24-Hour Timer, Sleep Mode, Energy Saver Mod

User Guide - Page 10

For IWA10KS30.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
ENGLISH
–10–
PMTS — FOLLOW ME (SOME MODELS)
Some models are equipped with a special feature that allows
the remote control to act as a thermostat. If your unit shows
this PMTS LED on the control panel, and you have the accom-
panying LCD remote control then your unit is equipped.
You must activate this feature through the remote control by
pressing the PMTS button. Once activated, it is important to
keep the remote aimed at the air conditioner and place it in
the center of the room for best results.
ENERGY SAVER MODE
This function is available on COOL mode. The fan will con-
tinue to run for 3 minutes aer the compressor shuts o.
The fan then cycles on for 2 minutes at 10-minute intervals
until the room temperature is above the set temperature,
at which time the compressor turns back on and Cooling
Starts. Note that due to modern energy saving regulations,
this mode is on by default and you must turn it o if you
want the fan to run constantly during cooling mode.
SLEEP MODE
In this mode the selected temperature will increase by 2°F
(or 2°C) 30 minutes aer the mode is selected. The tempera-
ture will then increase by another 2°F (or 2°C) aer an addi-
tional 30 minutes. This new temperature will be maintained
for 6 hours before it returns to the originally selected tem-
perature. This ends the Sleep mode and the unit will contin-
ue to operate as originally programmed. The Sleep mode
program can be canceled at any time during operation by
pressing the Sleep button again.
CHECK FILTER
This feature is a reminder to clean the Air Filter for more
eicient operation. The LED (light) will illuminate aer 250
hours of operation. To reset aer cleaning the filter, press
the Check Filter button and the light will go o. See section
under Cleaning and Maintenance for how to clean the filter.
Note: Your filter may need to be cleaned much more oen
in especially dusty environments and may not need to be
cleaned as oen in especially clean environments. The 250
hour indicator is just there as a reminder.
Ion
PMTS
Loading ...
Loading ...
Loading ...