Loading ...
Loading ...
Loading ...
Figure 2-10 Set Rule
6.
Oponal: You can set the parameters of mulple areas by repeang the above steps.
7.
For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,
refer to Linkage Method Sengs .
8.
Click Save.
Set Region Exing Detecon
It is used to detect objects exing from a predened virtual region. If it occurs, the device can take
linkage acons.
Before You Start
●
For certain device models, you need to enable the smart event funcon on VCA Resource page
rst.
●
For the device supporng HEOP, go to VCA → APP to import and enable Smart Event.
Steps
1.
Go to VCA → Smart Event → Region Exing Detecon . For certain device models, you should
go to Conguraon → Event → Smart Event → Region Exing Detecon .
2.
Check Enable.
3.
Select a Region. For the detecon region sengs, refer to
Draw Area .
4.
Set the minimum size and the maximum size for the target to improve detecon accuracy. Only
targets whose size are between the maximum size and the minimum size trigger the detecon.
For the detail sengs, refer to Set Size Filter .
5.
Set the detecon target, sensivity and the target validity.
Network Camera User Manual
52
Loading ...
Loading ...
Loading ...