Loading ...
Loading ...
Loading ...
16
English
MCM9/22-1
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 99 tracks can be stored in the
memory in any order.
2
4
6
7
3 5
,
1
MP3
-
CD/CD
-
R/CD
-
RW COMPATIBLE
MICRO SYSTEM
IR
CLOCK
RDS/
NEWS
STANDBY-ON
ECO POWER
OPEN
/
CLOSE
MP3
-
CD/CD
-
R/CD
-
RW COMPATIBLE
CD
PROGRAM
1 Load the desired disc on the disc tray (refer
to “Loading disc”).
2 Press CD to select a disc.
3 Press PROGRAM to start programming.
➜ PROG star ts flashing.
4 Press í or ë (S or T on the main
set) repeatedly to select the desired track.
● For MP3/WMA disc, press à / á and í /
ë (
S or T on the main set) to select
the desired album and title for programming.
5 Press PROGRAM to store.
● Repeat steps 4~5 to select other tracks.
➜ If you attempt to programme more than 99
tracks, "PROGRAM FULL" appears.
6 To start programme play, press ÉÅ.
7 To stop playback or to end the programming,
press Ç once.
➜ PROG stays and the programme mode
remains active.
Helpful Hints:
– If the total playing time reached 100 minutes or
if one of the programmed tracks has a number
greater than 30, then "--
:
--" will zappear instead
of the total playing time.
– For MP3/WMA discs always display "--
:
--".
– The system will exit programming mode if no
button is pressed within 20 seconds.
Checking the programme
1 Stop playback and press í or ë (S or
T on the main set) repeatedly.
2 Press ÉÅ to start playback from the
current programmed track.
Clearing the programme
● Stop playback, then press Ç to clear the
programme.
OR
Press the OPEN / CLOSE 0 button of the
disc tray.
➜ PROG disappears from the display and
"PROGRAM CLEARED" appears.
Helpful Hint:
– If the system is disconnected from the power
supply or you switch to other source mode, the
programme will be erased.
Disc Operations
001-025-MCM9-11_22_Eng 3/17/05, 11:2016
Loading ...
Loading ...
Loading ...