Loading ...
Loading ...
Loading ...
Assembly & Set-Up
2
4
Assembly
NOTE: This unit is shipped without gasoline or oil in
the engine. Fill up gasoline and oil as instructed in
the accompanying engine manual BEFORE operating
your chipper shredder.
Chipper Chute (Model Series CS3310 & 4325)
For shipping reasons, the unit is crated with its
chipper chute in a raised position. To pivot it
downward, proceed as follows:
1. Pull the spring latch upward. See A in Figure
2-1.
2. Gently pivot the chipper chute down until it
clicks into the lock rod. See B in Figure 2-1.
B
A
Figure 2-1
WARNING: Never operate the chipper
shredder with the chipper chute in the
raised position. Doing so may result in
property damage or serious injury to the
operator or bystanders.
Bag
To attach the bag:
1. Place the opening of the bag completely over
the chute deflector. See Figure 2-2.
Figure 2-2
2. Position the bag so that the wing knobs which
secure the chute deflector to the impeller
housing are completely covered.
3. Pull on the draw-strap until the bag is tight
around chute deflector opening.
Tow Bar (If Equipped)
To attach the tow bar:
1. Remove the spring pin and clevis pin from the
end of the tow bar receiver. See Figure 2-3.
1
Figure 2-3
2. Insert the tow bar into the receiver. See Figure
2-4.
3. Reinsert the clevis pin through aligning holes
in both the tow bar and the receiver. See
Figure 2-4.
4. Fasten with the spring pin to secure. See
Figure 2-4.
2
3
4
Figure 2-4
Set-Up
Gas and Oil Fill-Up
Refer to the separate engine owner’s manual for
additional engine information.
1. Add oil provided before starting unit for the
first time out of the box. See the separate
engine owner’s manual for instructions for
adding the engine oil.
2. Service the engine with gasoline as instructed
in the separate engine owner’s manual.
WARNING: Use extreme care when
handling gasoline. Gasoline is extremely
flammable and the vapors are explosive.
Never fuel the machine indoors or while
the engine is hot or running. Extinguish
cigarettes, cigars, pipes and other sources
of ignition.
WARNING: Never fill fuel tank indoors
with engine running or until the engine
has been allowed to cool for at least two
minutes after running.
Contents of Carton
• Chipper Shredder (1) • Operator’s Manual (1) • Engine Operator’s Manual (1)
• Tow Bar (1) (If Equipped) • Bag (1) • Safety Glasses (1)
• Bottle of Oil (1)
Thank you for purchasing this product. It was carefully engineered to provide
excellent performance when properly operated and maintained.
Please read this entire manual prior to operating the equipment. It instructs you
how to safely and easily set up, operate and maintain your machine. Please be
sure that you, and any other persons who will operate the machine, carefully
follow the recommended safety practices at all times. Failure to do so could
result in personal injury or property damage.
All information in this manual is relative to the most recent product information
available at the time. Review this manual frequently to familiarize yourself with the
machine, its features and operation. Please be aware that this Operator’s Manual
may cover a range of product specifications for various models. Characteristics
and features discussed and/or illustrated in this manual may not be applicable to
all models. We reserve the right to change product specifications, designs and
equipment without notice and without incurring obligation.
If applicable, the power testing information used to establish the power rating
of the engine equipped on this machine can be found at www.opei.org or the
engine manufacturer’s web site.
If you have any problems or questions concerning the machine, phone your
local authorized service dealer or contact us directly. We want to ensure your
complete satisfaction at all times.
Throughout this manual, all references to right and left side of the machine are
observed from the operating position.
Thank You
Loading ...
Loading ...
Loading ...