Loading ...
Loading ...
Loading ...
When you use the wine cooler for the first time or restart the wine cooler after having
been shut off for a long time, there could be a few degrees variance between the
temperature you select and the one indicated on the LED readout . This is normal and
it is due to the length of the activation time. Once the wine cooler is running for a few
hours everything will be back to normal.
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the wine
cooler will not start.
The controls of your wine cooler
Up
Used to raise (warm)the set temperature by 1
°C
or 1
°F
.
Temperature Display
°C
/
°F
Display
Down
Used to lower (cool) the set temperature by 1
°C
or 1
°F
.
Set temperature
press this bottom,
to set temperature.
view the SET and
temperature in at any time
the “SET” on SET temperature will temporarily “flash” in the LC D
display for 5 seconds
The DISPLAY temperature
°F /°C Selector
Select the temperature display setting in Fahrenheit or Celsius degree.
Operating Your Wine Cooler
The Wine cooler should
be
placed in
a
position
where the ambient temperature is
between
-38°C /41-100°F . Humidity level is between 45~90%. If the position is above
or below this range, the performance of the unit may be affected. For example, placing
your unit in extreme cold or hot conditions may cause interior temperature to fluctuate.
NOTE:
DISPLAY
shows you the current temperature of your wine cooler.
or
.
You can
2
3
5
6
4
7
Backlight Used to turn on/off the backlight.
1
1
2
3
4
5
6
Within 5 seconds, you can press
732 South Racetrack Road, Henderson, Nevada 89015
i n f o @ v i not e m p . c o m
15
Loading ...
Loading ...
Loading ...