Loading ...
Loading ...
Loading ...
13
Warnings
1. Safety precautions
a. To avoid fire, do not dry clothes or leave any towels in the sauna room.
b. Do not install the sauna near water, near a bathtub, near a shower, in a wet basement, or near a swimming pool.
c. To prevent burns or electric shocks, do not touch or use metal tools on the protective material covers of the heat
emitter panels.
d. When replacement parts are required, be sure they meet the specified requirements of the manufacturer.
Unauthorized substitutes may result in fire, electric shock, or other hazardous conditions. After any repairs,
please perform safety checks to determine that your sauna is working properly.
e. While in the sauna, do not touch the light bulb. If the bulb needs to be changed, switch it off and wait until the
sauna is shut off and the bulb is cool.
f. Do not use any wall receptacle adapter or extension cord between the sauna cord and wall receptacle. An
applicable heavy duty surge protector can be used.
g. Do not spray water on the heat emitter panels. This may result in electric shock or damage to the heat
emitters.
h. Always consult your physician for medical advice before using the sauna room.
i. Do not use the sauna if you have any of the following conditions below:
1. Open wounds
2. Eye diseases
3. Severe sunburns
4. The elderly & weak. Those suffering from any medical condition or disease. Pregnant women and
children should not use the sauna room. Children should not use the sauna unless prescribed by a
medical physician and under the supervision of an adult.
5. If suffering from a disease directly related to temperature, seek the advice of a medical physician before
using the sauna.
6. Do not place pets in the sauna.
7. Never use the sauna if you are taking medications or consuming alcohol.
Troubleshooting:
problem
possible reason
countermeasure
1
indicator light for power
supply not working
The connector is not connected
properly
Check the connector or replace a new
one
No power supply input
Check your circuit breaker to confirm
power at the wall outlet
Indicator light is broken
replace the circuit panel
2
Indicator light for function
is not working
The heating indicator light is broken
Replace the relevant control panel
The circuit board or components are
broken
Replace the circuit board
The temperature sensor is broken
check the connection of the
temperature sensor
Loading ...
Loading ...
Loading ...