Loading ...
Loading ...
Loading ...
6
Attaching The Nozzle
• Remove three wing nuts from the front of the
chipper shredder vacuum.
• Place nozzle in position over the three studs on unit
and secure with wing nuts just removed.
See Figure 2.
Figure 2
NOTE: The metal tab on the nozzle must depress the
safety switch button attached to the front of chipper
shredder vacuum or the engine will not start.
Attaching the Chipper Chute
• Loosen, but do NOT remove, the two hex bolts, flat
washers, and flange nuts which are secured to the
support bracket. See Figure 3.
Figure 3
• Remove the two flange nuts, hex bolts and saddle
washers which secure the right side of the upper
handle to the right side of the lower handle.
See Figure 4.
• Next, remove the three hex nuts and bell washers
from the weld studs found beside the opening on
the right side of the chipper-shredder vacuum.
Figure 4
• Place the chipper chute over the weld studs
keeping the slotted side towards the bottom.
Loosely secure with the three hex nuts and bell
washers that were removed earlier. Do not fully
tighten the hex nuts at this point in the assembly.
See Figure 5.
Figure 5
• Align the support bracket with the holes in the right
side of the upper and lower handles where the hex
bolts were just removed. Push up slightly on the
chipper chute in order to better align the holes in
the support bracket with the holes in the handles.
• Replace the hex bolts, saddle washers and flange
nuts to affix the support bracket to the handle
assemblies. See Figure 5.
• Follow by tightening all hardware securely first on
the chipper chute, then on the support bracket,
and finally on the handle.
Attaching The Bag
• Place bag under of upper handle assembly and slip
the front opening on the bag over the discharge
chute, making certain it is over the rim on the
discharge chute. See Figure 6.
Wing
Nuts
Wing
Nut
Nozzle
Chipper
Chute
Hex Bolts
Flat
Support
Bracket
Washers
Flange
Nuts
Hex Bolts &
Saddle Washers
Flange Nuts
Weld
Hex Nuts &
Bell Washers
Studs
Flange
Nuts
Chipper
Chute
Support
Bracket
Hex Bolts &
Saddle Washers
Hex Nuts &
Bell Washers
Slot
Loading ...
Loading ...
Loading ...