Loading ...
Loading ...
Loading ...
150
For other models NOT equipped with AI functions
Figure 3-38
1. Based on your installation environment, select the Detection Scene between outdoor
and indoor (see Detection Parameters in 3.6.2 Advanced Settings). By default, Outdoor
is selected.
2. Once enabled, select Rule Settings > click
to add a detection line. Repeat to add
another detection line.
3. Drag the ends of the detection line to the intended position to mark the detection
boundary.
4. Select the Trigger Direction, which will define the direction to trigger an alarm. For
example, if you choose A -> B, people moving from direction A to B will trigger an alarm.
5. Move the slider to adjust the detection Sensitivity.
6. Set up Trigger Actions:
Figure 3-39
A. Select Upload to FTP / Send E-mail / Upload Image (Original) under Trigger
Actions to automatically upload snapshots to the specified FTP server and/or send
snapshots to the specified e-mail address upon the video analytic events.
B. Select A -> 1 / Alarm Sound to trigger an output device upon cross line detection.
Depending on your model, select A -> 1 or Alarm Sound to trigger an output device
upon people / vehicle / non-motor vehicle detection.
C. Optionally click next to Alarm Sound to set the desired Day, Start Time, End
Time, Alarm Audio, and Number of Repeat Times. You can set up to four periods
for each time, and the time periods cannot overlap.
Loading ...
Loading ...
Loading ...