Loading ...
Loading ...
Loading ...
[Note:]
・When set to [Open], the alarm will be output for approximately 20 seconds when
the power to the computer is turned on.
[Alarm notification] to return the output terminal to the normal state.
[Terminal action upon alarm detection]
Set the output status of the alarm output from the output terminal by [Open] or [Close].
[Open]:Set the alarm output terminal to Open (usually Close).
[Close]:The terminal at the time of alarm output is closed (normally open).
[Pulse output width]
Sets the time when the alarm is output from the output terminal when [Pulse] is selected in
[Terminal state upon alarm detection].
Settable range:1~120s
4.8.3 [Alarm] to change the aux name
Click [Alarm] on the Alarm page. (See the following for how to display and operate the Advanced
menu.
→4.2.1 How to display
→4.2.2 How to operate
You can change the [AUX], [Open], and [Close] names for live picture pages.
AUX title
[AUX (Up to 10 characters)]
Enter the [AUX] name for the live picture page.
Characters that cannot be entered:Half-pitch symbol " &
[Open (Up to 5 characters)]
Enter the [Open] name for the [AUX] buttons on the live picture pages.
Characters that cannot be entered:Half-pitch symbol " &
[Close (Up to 5 characters)]
Enter the [Close] name for the [AUX] buttons on the live picture pages.
Characters that cannot be entered:Half-pitch symbol " &
4 Advanced settings
4.8 [Alarm] to set the alarm
260
Loading ...
Loading ...
Loading ...