Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us !
Do NOT return this item.
6-Piece Patio Furniture Set
HW69177
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
US:cs.us@costway.com
UK:cs.uk@costway.com
US office: Fontana UK office: Ipswich AU office: Truganina
Before You Start
Read each step carefully before starting. It is very important
to ensure each step followed in correct order, otherwise
assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw
edges. Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to
where the unit will be used.
Keep the handtools close at hand. Do not use power tools to
assemble your furniture. They may scratch or damage the
parts.
02 03
50% Tighten before fixing all screws, Allen wrench is
recommended instead of an electric drill.
Place the item on a fiat ground to adjust and make sure it remains
stable.
Tighten up alls crews with tools gradually.
If the screws are not aligned with holes during assembly, please
loosen all the other screws to 50% and continue the assembly
process.
If the item is not stable, please loosen all the screws, adjust it on
a flat ground and tighten up all screws again.
Note: If one or some screws are fully tightened during assembly,
chances are the others will not be aligned with holes. In addition,
all the holes are designed to be relatively larger to provide more
space for the adjustment of the screws.
1.
Notice
2.
3.
4.
5.
6.
E
A
G
N
N
O
O
W
I
J
C
B
B
K
H
L
L
L
L
M
M
M
M
A1
D
Before You Start
Read each step carefully before starting. It is very important
to ensure each step followed in correct order, otherwise
assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw
edges. Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to
where the unit will be used.
Keep the handtools close at hand. Do not use power tools to
assemble your furniture. They may scratch or damage the
parts.
02 03
50% Tighten before fixing all screws, Allen wrench is
recommended instead of an electric drill.
Place the item on a fiat ground to adjust and make sure it remains
stable.
Tighten up alls crews with tools gradually.
If the screws are not aligned with holes during assembly, please
loosen all the other screws to 50% and continue the assembly
process.
If the item is not stable, please loosen all the screws, adjust it on
a flat ground and tighten up all screws again.
Note: If one or some screws are fully tightened during assembly,
chances are the others will not be aligned with holes. In addition,
all the holes are designed to be relatively larger to provide more
space for the adjustment of the screws.
1.
Notice
2.
3.
4.
5.
6.
E
A
G
N
N
O
O
W
I
J
C
B
B
K
H
L
L
L
L
M
M
M
M
A1
D
04 05
A A1
P1 P2 P3 P4
B C
D E F G
H I J K
L M N
T U W
O
1 2 3 4
5 6 7 8
9 10 11 12 13
Back frame of
armless chair (2 pcs)
Table (1 pc) Glass (1 pc)
Seat cushion (5 pcs) Long pillow (5 pcs)
Right mounting
plate (1 pc)
Left mounting
plate (1 pc)
Short pillow (2 pcs)
Fabric capony (1 pc)
Small pillow (2 pcs)
Back frame of
armless chair (1 pc)
Seat frame of
armless chair (3 pcs)
Side frame of
armless chair (6 pcs)
Side frame of
right corner (1 pc)
Seat frame of
right corner (1 pc)
Seat frame of
left corner (1 pc)
Bolt M6x25 mm
(8 pcs)
Bolt M6x15 mm
(4 pcs)
Long block
foot(4 pcs)
Allen key
M4(2 pcs)
Wrench(1 pc)
M6 Nut(8 pcs)
Washers
M6x1 mm
(94 pcs)
Foot cap
M6x40 mm
(16 pcs)
Iron plate(2 pcs) Block foot(16 pcs)
Bolt M6x30 mm
(52 pcs)
Bolt M6x40 mm
(22 pcs)
Screw M6x15 mm
(30 pcs)
Back frame of
right corner (1 pc)
(1 pc) (1 pc) (1 pc) (1 pc)
Q1 Q2 Q3 Q4
(1 pc) (6 pcs) (3 pcs) (1 pc)
R1 R4 S1 S4
(1 pc) (1 pc) (1 pc) (1 pc)
Back frame of
left corner (1 pc)
Side frame of
left corner (1 pc)
04 05
A A1
P1 P2 P3 P4
B C
D E F G
H I J K
L M N
T U W
O
1 2 3 4
5 6 7 8
9 10 11 12 13
Back frame of
armless chair (2 pcs)
Table (1 pc) Glass (1 pc)
Seat cushion (5 pcs) Long pillow (5 pcs)
Right mounting
plate (1 pc)
Left mounting
plate (1 pc)
Short pillow (2 pcs)
Fabric capony (1 pc)
Small pillow (2 pcs)
Back frame of
armless chair (1 pc)
Seat frame of
armless chair (3 pcs)
Side frame of
armless chair (6 pcs)
Side frame of
right corner (1 pc)
Seat frame of
right corner (1 pc)
Seat frame of
left corner (1 pc)
Bolt M6x25 mm
(8 pcs)
Bolt M6x15 mm
(4 pcs)
Long block
foot(4 pcs)
Allen key
M4(2 pcs)
Wrench(1 pc)
M6 Nut(8 pcs)
Washers
M6x1 mm
(94 pcs)
Foot cap
M6x40 mm
(16 pcs)
Iron plate(2 pcs) Block foot(16 pcs)
Bolt M6x30 mm
(52 pcs)
Bolt M6x40 mm
(22 pcs)
Screw M6x15 mm
(30 pcs)
Back frame of
right corner (1 pc)
(1 pc) (1 pc) (1 pc) (1 pc)
Q1 Q2 Q3 Q4
(1 pc) (6 pcs) (3 pcs) (1 pc)
R1 R4 S1 S4
(1 pc) (1 pc) (1 pc) (1 pc)
Back frame of
left corner (1 pc)
Side frame of
left corner (1 pc)
06 07
Connect Side frame (C) & Seat frame (B) with Bolt (2) & Washer (10)
Connect part from Step1 & Back frame (A) with Bolt (2), Bolt (3) &
Washers (10)
C
A
M
L
2
8
2
2
2
2
8
8
8
11
11
11
11
2
2
2
2
2
3
3
2
2
C
B
STEP 1
STEP 2
STEP 3
STEP 4
Connect part from Step2 & Block foot (8) with Bolt (2), Foot cap (11)
& Washers (10)
Assembly for a single chair is completed.
(Armless chair assembly)
x2 x2
x2 x2
06 07
Connect Side frame (C) & Seat frame (B) with Bolt (2) & Washer (10)
Connect part from Step1 & Back frame (A) with Bolt (2), Bolt (3) &
Washers (10)
C
A
M
L
2
8
2
2
2
2
8
8
8
11
11
11
11
2
2
2
2
2
3
3
2
2
C
B
STEP 1
STEP 2
STEP 3
STEP 4
Connect part from Step2 & Block foot (8) with Bolt (2), Foot cap (11)
& Washers (10)
Assembly for a single chair is completed.
(Armless chair assembly)
x2 x2
x2 x2
08 09
D
E
F
G
8
8
8
8
2
2
2
2
11
3
3
11
11
11
Connect Table (D) & Block foot (8) with Bolt (2), Foot cap (11) &
Washers (10)
Put the glass panel (E) on top of the part assembled in Step 5.
(Table assembly)
(Right corner chair assembly)
Assembly for the table is completed.
Connect Back frame of right corner (G) & Side frame of right corner
(F) with Bolt (3) & Washer (10)
STEP 5
STEP 6
STEP 7
STEP 8
08 09
D
E
F
G
8
8
8
8
2
2
2
2
11
3
3
11
11
11
Connect Table (D) & Block foot (8) with Bolt (2), Foot cap (11) &
Washers (10)
Put the glass panel (E) on top of the part assembled in Step 5.
(Table assembly)
(Right corner chair assembly)
Assembly for the table is completed.
Connect Back frame of right corner (G) & Side frame of right corner
(F) with Bolt (3) & Washer (10)
STEP 5
STEP 6
STEP 7
STEP 8
10 11
H
J
K
I
3
3
3
3
3
3
3
3
3
3
3
3
3
3
(Left corner chair assembly)
Connect part from Step 8 & Seat frame of right corner (H) with Bolt
(3) & Washers (10)
Assembly for the right corner chair is completed.
Connect Back frame of left corner (I) & Side frame of left corner (J)
with Bolt (3) & Washer (10)
Connect part from Step 11 & Seat frame of left corner (K) with Bolt
(3) & Washers (10)
STEP 9
STEP 10
STEP 11
STEP 12
10 11
H
J
K
I
3
3
3
3
3
3
3
3
3
3
3
3
3
3
(Left corner chair assembly)
Connect part from Step 8 & Seat frame of right corner (H) with Bolt
(3) & Washers (10)
Assembly for the right corner chair is completed.
Connect Back frame of left corner (I) & Side frame of left corner (J)
with Bolt (3) & Washer (10)
Connect part from Step 11 & Seat frame of left corner (K) with Bolt
(3) & Washers (10)
STEP 9
STEP 10
STEP 11
STEP 12
12 13
C
C
A1
B
2
2
2
2
2
3
3
2
2
2
(Middle seat assembly)
Assembly for the left corner chair is completed.
Connect Side frame (C) & Seat firame (B) with Bolt (2) & Washer (10)
Connect part from Step14 & Back frame (A1) with Bolt (2), Bolt (3) &
Washers (10)
Assembly for the middle chair is completed.
STEP 13
STEP 14
STEP 15
STEP 16
12 13
C
C
A1
B
2
2
2
2
2
3
3
2
2
2
(Middle seat assembly)
Assembly for the left corner chair is completed.
Connect Side frame (C) & Seat firame (B) with Bolt (2) & Washer (10)
Connect part from Step14 & Back frame (A1) with Bolt (2), Bolt (3) &
Washers (10)
Assembly for the middle chair is completed.
STEP 13
STEP 14
STEP 15
STEP 16
14 15
13
V V
16
10
P1
P1
4
4
4
4
4
4
4
4
4
4
4
4 4
4
4
4
4
4
4
4
4
4
4
4
P2
Q2
Q2
Q2
Q1
R1
S1
S4
S4
R1
R4
Q3
Q3
Q3
Q2
Q2
Q4
Q4
P2
P3
P4
Left corner
Middle chair
Right corner
(BENCH assembly) (Part 1)
(Part 2)
(Part 3)
(Part 4)
STEP 17 STEP 19
STEP 20
STEP 21
STEP 22
Connect assembled parts from steps 10, 13, 16 through the iron plate
(V) with bolts (5) & washers (10).
Connect the iron bars (P1), (P2), (P3), (P4) with screws (4).
Connect the iron bars (Q1), (Q2) (2pcs), (Q3), (Q4) with screws (4).
Connect the iron bars (R1), (Q2)(2pcs), (Q3), (R4) with screws (4).
Connect the iron bars (S1), (Q2)(2pcs), (Q3), (S4) with screws (4).
Attach block foot (8), long block foot (9) to the assembled part from
Step 20 with bolts (2), foot caps (11) and washers (10).
STEP 18
Q2 Q3 Q2
Q2
4
4
4
4
4
4
4
4
4
5
5
11
11
8
8
9
9
9
9
2
2
11
8
2
11
8
2
2
2
2
2
2
2
2
2
5
5
14 15
13
V V
16
10
P1
P1
4
4
4
4
4
4
4
4
4
4
4
4 4
4
4
4
4
4
4
4
4
4
4
4
P2
Q2
Q2
Q2
Q1
R1
S1
S4
S4
R1
R4
Q3
Q3
Q3
Q2
Q2
Q4
Q4
P2
P3
P4
Left corner
Middle chair
Right corner
(BENCH assembly) (Part 1)
(Part 2)
(Part 3)
(Part 4)
STEP 17 STEP 19
STEP 20
STEP 21
STEP 22
Connect assembled parts from steps 10, 13, 16 through the iron plate
(V) with bolts (5) & washers (10).
Connect the iron bars (P1), (P2), (P3), (P4) with screws (4).
Connect the iron bars (Q1), (Q2) (2pcs), (Q3), (Q4) with screws (4).
Connect the iron bars (R1), (Q2)(2pcs), (Q3), (R4) with screws (4).
Connect the iron bars (S1), (Q2)(2pcs), (Q3), (S4) with screws (4).
Attach block foot (8), long block foot (9) to the assembled part from
Step 20 with bolts (2), foot caps (11) and washers (10).
STEP 18
Q2 Q3 Q2
Q2
4
4
4
4
4
4
4
4
4
5
5
11
11
8
8
9
9
9
9
2
2
11
8
2
11
8
2
2
2
2
2
2
2
2
2
5
5
16 17
T
2
2
W
W
U
1
10
6
3
Part
1
Part 1
Part
1
Part
2
Part
3
Part
4
Part
2
Part 2
Part
3
Part 3
Part
4
Part 4
Put the Part 1, Part 2, Part 3, Part 4 into the hole of the fabric
canopy (W).
Attach the Left mounting plate (U) and Right mounting plate (T) to
the assembled bench with bolts (2) and washers (10).
STEP 23
STEP 24
Use Bolts (1), Washers (10) and M6 Nuts (6) to fasten the fabric
canopy assembled in Step 26 to the left and right mounting plates of
the bench.
The fabric canopy is retractable.
STEP 25
STEP 26
U
2
2
16 17
T
2
2
W
W
U
1
10
6
3
Part
1
Part 1
Part
1
Part
2
Part
3
Part
4
Part
2
Part 2
Part
3
Part 3
Part
4
Part 4
Put the Part 1, Part 2, Part 3, Part 4 into the hole of the fabric
canopy (W).
Attach the Left mounting plate (U) and Right mounting plate (T) to
the assembled bench with bolts (2) and washers (10).
STEP 23
STEP 24
Use Bolts (1), Washers (10) and M6 Nuts (6) to fasten the fabric
canopy assembled in Step 26 to the left and right mounting plates of
the bench.
The fabric canopy is retractable.
STEP 25
STEP 26
U
2
2
18 19
Put the Seat cushion (L), the Long pillow (M), the Short pillow(N) &
the Small Pillow (O) on the complete bench.
STEP 27
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the
finish.
Liquid spills should be removed immediately. Using a soft clean cloth, blot
the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood.
It is advised to keep furniture away from direct sunlight as sun may
damage the finish.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture as it
ages.
Further advice about wood
furniture care
N
N
M
L
L
L
O
O
M
M
18 19
Put the Seat cushion (L), the Long pillow (M), the Short pillow(N) &
the Small Pillow (O) on the complete bench.
STEP 27
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the
finish.
Liquid spills should be removed immediately. Using a soft clean cloth, blot
the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood.
It is advised to keep furniture away from direct sunlight as sun may
damage the finish.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture as it
ages.
Further advice about wood
furniture care
N
N
M
L
L
L
O
O
M
M
Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us !
Do NOT return this item.
6-Piece Patio Furniture Set
HW69177
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
US:cs.us@costway.com
UK:cs.uk@costway.com
US office: Fontana UK office: Ipswich AU office: Truganina
