Loading ...
Loading ...
Loading ...
Figure 5-187 Parameters (Registration mode)
Table 5-52 Parameters description
Parameter Description
Alarm Trigger Condition
Receive an alarm event according to the set rule and display
it on the live page.
●
Match attributes alarm: When the detected workwear
matches the set attributes, an alarm is triggered.
●
Mismatch attributes alarm: When the detected workear
does not match the set attributes, an alarm is triggered.
Min Duration
Set the minimum time for the person wearing the workwear
to appear in the detection area until an alarm is triggered.
Repeat Alarm Time
Set the repeat alarm time.
If the alarm state persists, when reaching the repeat alarm
time, the alarm is triggered again.
Workwear
Select Detection Mode.
●
Detect by attribute: You need to set the detection range.
●
Registration mode: You need to link the workwear
database that has been set for the front-end camera.
Receive an alarm event based on the linked workwear
database and display it.
a. Click Settings next to Linked Workwear Database.
b. Select workwear database1 , and then click OK.
Hat Select Detect for Attributes , Detection Range, and Color.
Face Mask
Select Detect for Attributes.
Apron
User's Manual
304
Loading ...
Loading ...
Loading ...