Loading ...
Loading ...
Loading ...
10
Cable Length Test
If performing a Cable Length test for the first time, it is recommended you
perform Calibration for the most accurate results. To perform Calibration,
follow the steps below.
Calibration
1. Connect a cable to the appropriate port on the Main Tester unit, using
the RJ45 port marked Main for Cat5 / Cat6 cables. You do not need to
connect the other end to the Remote Tester unit.
2. Navigate to the Type option in the LCD Interface Menu and select the
type of cable you have connected by pressing the Enter button to toggle
through the options.
3. Once you’ve selected the appropriate cable, navigate to the Unit option
and select the unit of measurement you want to display results in by
pressing the Enter button to toggle through the options.
4. Once you’ve selected the unit of measurement, navigate to the
Calibration option and press the Enter button to initiate calibration.
5. A screen will appear asking if you want to proceed. Choose Yes and
press the Enter button to proceed with calibration.
6. The tester will measure the cable, providing the results as a Base Adjust
measurement. Use the Up and Down buttons to bring the length to the
exact measurement of the cable you have connected and press the
Enter button.
7. Upon pressing Enter, a screen will appear that lists Calibration 1 through
Calibration 7. You can save up to seven sets of calibration data to
use with various cables. Select the desired option and press the Enter
button to store your calibration data to that option.
8. To use the stored data, navigate to the Load Data option in the LCD
Interface Menu and press Enter. The same list of calibration options
appear, listing Calibration 1 through Calibration 7. Select the desired
option and press Enter to load the calibration data into the tester. You
are now ready to to perform Cable Length testing.
19-04-414-9334DF-EN.indd 10 6/21/2019 8:26:41 AM
Loading ...
Loading ...
Loading ...