Loading ...
Loading ...
Loading ...
1. Place the water dispenser on a level surface. Plug the water dispenser into a grounded power
outlet.
2. First, the unit will pump the water from the water bottle into the cooling and heating tanks, this
takes about 15 minutes. During this time, the unit’s compressor will run continuously, this is
normal.
3. First, turn the hot water switch on the back of the unit into the ON position. Next, turn the cold
water switch into the ON position.
DO NOT TURN ON BOTH SWITCHES AT THE SAME TIME.
Once this is completed both cooling and heating indicator lights should light up.
4. After both switches are turned on, it is recommended that you wait 1 hour before usage. After 1
hour, the water dispenser will be ready to dispense hot, cold, and room temperature water.
5. For ideal usage, it is recommended that 2 Liters of water runs through the water dispenser
before use. This is recommended as the unit has been sitting idle during manufacturing.
6. It is recommended that if the hot water option is not used, the hot water switch (red) be turned
OFF. This will help conserve energy.
NOTE: The appliance is designed to provide hot or cold water whenever you need it. It will
automatically turn on and off when hot and cold water reaches the desired temperatures.
PRODUCT OPERATION
6
Loading ...
Loading ...
Loading ...