Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
45
Slide the depth stops forwards to the
position shown.
Slide the covers back again.
Carefully push in the deflector plate
as far as the required position.
This will push the depth stops into the
required position.
Use a pencil to mark the back edge
of the deflector plate on the cover.
Pull out the deflector plate.
To fix the depth stops in place, screw
the 3.9x7.5mm screws through the
covers. The position of the screws is
determined by which way around the
depth stops have been inserted.
- Depth stop lip facing backwards:
10mm in front of the pencil mark
- Depth stop lip facing forwards:
10mm behind the pencil mark
Loading ...
Loading ...
Loading ...