Loading ...
Loading ...
Loading ...
IMPORTANT: Please fit the wheel assemblies as per the diagram. Any other position may affect
the stability of the heater.
1. Carefully turn the heater upside-down on a non-scratching and stable surface to prevent
damage to the paint finish or your floor surfacing.
2. Fit the castors to the castor plates by placing each castor onto the spindle and pressing in
until it clicks into place. This will require quite a lot of force.
3. Fit the castors plates onto the heater by placing the U-shaped bolt between the outermost
fin away from the control side of the heater. Place one of the castor plates with the castors
pointing to the outside of the heater onto the U-Bolt and secure with the wing nut.
4. Attach the second castor plate (right angle version) to the bottom of the control panel with
the castors pointing forwards to the outside of the heater, then securely fasten the castor
plate onto the heater with the two screws.
Main Body x1
Wing Nut x1
U-shape Bolt x1
Assembling GOC125
5 Fin Castor Plates
Screw x2
Castors x4
5 Fin Castor Plates
Loading ...
Loading ...
Loading ...