Loading ...
Loading ...
Loading ...
12. Put the rubber gasket (#4) onto the strainer (#3)
13. Put the rubber gasket and strainer through the pre-drilled drain hole.
14. Put the flat rubber gasket (#5) onto the connector (#7).
15. Connect the connector with the flat rubber gasket, strainer, and rubber gasket and tighten them by
hand. Then use a wrench to tighten the connector.
The installation steps below are for drain model A1840-0.
7
Strainer
Rubber Gasket
A1840-0
Flat Rubber Gasket
Connector