Loading ...
Loading ...
Loading ...
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
For best drying results, When loads Contain piastic dinnerware that may be HeavY Wash, Normal
dishes with heat. sensitive t0 high temperatures, Wash, China/Crystal,
This option With the use of rinse aid Will provide the best Lnsta Wash or Senso [
drying performancel ulean cyc!es
Tosanitize your dishes and
glassware in accordance
with NSF/ANSI Standard
184 for Residential
Dishwashers.
Raises the water temperature in the final rinse to
approximately 154°F (68°C). This high temperature rinse
sanitizes your dishes and glassware in accordance with
NSF/ANSI Standard 184 for Residential Dishwashers.
Certified residential dishwashers are not intended for
licensed food establishments.
The Sanitize option adds heat and time to the cycle.
Heavy Wash, Normal
Wash, Light Wash,
China/Crystal or Sensor
Clean cycles
Loads containing tough, Increases the target water temperature during the wash All cycles, except Rinse
baked-on food portions of the cycle. Only and Insta Wash
Adds heat, wash time and water to the cycle,
Use for loads with tough
food soil.
Depending on which cycle is being used, adds heat and/or
wash time to the cycle.
Heavy Wash or Normal
Wash
USefor loads With normal Raises temperature inthe final rinse to i60°F (71°O)i All Cycles, except QUick
amounts of food soil. Wash and Rinse Only
Use for loads with normal
amounts of food soils;
specialized option for
stemware and glass
cleaning.
Provides deep clean and shine by adding steam to the cycle.
Raises the water temperature in the final rinse to
approximately 154°F (68°C).
All cycles, except Rinse
Only and Insta Wash
To run y0Ui dishwasher at De!ays the start 0f a cYcle up to 9 hoUrsl All cycles, except RinSe
a later time or dunng off Only
,. i " se!ect a WaShcYcle and optionsl Press UelaYl PressStartJ
peak nours
Cancel. C!ose the door firmly.
Control Lock To avoid unintended use of
your dishwasher, or cycle
and option changes during
a cycle.
To turn on Lock, press and hold Heated Dry for at least
3 seconds.
To turn off Lock, press and hold Heated Dry for at least
3 seconds.
When Control Lock is lit, all buttons are disabled. Ifyou press
any pad while your dishwasher is locked, the light flashes
5 times. The dishwasher door can be opened while the
controls are locked.
Anytime
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the
cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle
will automatically compensate by adding time, heat and water as needed.
CONTROL PURPOSE COMMENTS
To start 0r iesume a if the do0r is opened during a CYcle oi the p0wer is interrupted, all lights Will flash to indicate
To follow the
progress and status
of your dishwasher
cycle
Clean indicator glows when a cycle is finished.
Ifyou select the Sanitize option, when the Sanitize cycle is finished, the Sanitized indicator glows.
If your dishwasher did not properly sanitize your dishes, the light will not come on. This can
happen if the cycle is interrupted, or the water could not be heated to the required temperature.
The clean and sanitize lights go off when the door has been opened for more than 30 seconds or
the CANCEL key is pressed.
Loading ...
Loading ...
Loading ...