Loading ...
Loading ...
Loading ...
9
1
Select battery packs have a polarized plug
A
on an output cord permanently connected to
the rear panel. Simply plug the output cord
directly into the UPS external battery
connector (refer to the UPS manual for
external battery connector description and
location).
Note: Only one of these battery packs is generally
connected to a UPS at one time. For longer
runtime, use one or more Tripp Lite Battery Packs
with daisy-chain capability.
2
Select battery packs feature daisy-chain
capability for longer runtime
B
. To connect
multiple battery packs to a single UPS for
increased runtime, connect the cabled output
connector of the first battery pack to the UPS
system’s external battery connector, then
“daisy-chain” the others:
C
connect the
corded output connector on the second
battery pack to the daisy-chain input
connector on the second pack, and so on.
(Refer to your UPS Owner’s Manual for
external battery connection description and
location.)
Connection
A
B
C
1
2
3
Note: Multiple battery pack arrays will provide longer runtimes, but will also require longer
recharge times.
3
Select battery packs contain an external battery detection port on the rear panel.
The battery packs should only be used with host UPS models that provide the same
functionality. The UPS will automatically detect the external battery upon connection
with the battery communication cable
D
. Check the UPS manual for compatible
external battery pack models, configuration requirements and potential limitations.
Battery packs are for use only with UPS systems supporting external battery pack
detection cabling (this connection is not required if the UPS does not support this
feature).
D
Battery
Pack
UPS
18-08-360 93-2487.indb 9 12/17/2018 7:16:11 PM
Loading ...
Loading ...
Loading ...