Loading ...
Loading ...
Loading ...
9
1. Remove the product from the box.
2. Remove any packaging from the product.
3. Please retain all packaging until you have checked and counted all the parts
and the contents against the parts list.
4. Dispose of the packaging in a responsible manner.
Installing the Wall Mounting Kit:
• This unit is complete with a wall mounting kit, for easy charging and storage.
• To affix the wall mounting kit to a wall, first place it flat against the desired area
and mark out its dimensions in pencil.
• Once the dimensions are marked out, drill 2 holes into the wall, ensuring they
roughly match up to the screw holes at the back of the mount.
• When the 2 holes have been made, insert a screw and wall plug into each of
them. Ensure the screws are firmly secured before attempting to hang the
mount from them.
• When the 2 screws are slotted in and firmly secured, place the wall mount
against the wall so that the 2 screw holes at the back align with the 2 screws on
the wall. Once the 2 parts are aligned, let the mount slide down slightly until it
sits flush atop the 2 screws.
• The wall mount is now ready for normal use.
5 - Using Your Appliance
Charging the Appliance:
1. This unit can be charged using the included mains adaptor and charging base.
2. To charge the vacuum, slot the mains adaptor through the hole at the bottom
of the base, so that the charging pin sits in an upright position. The charger is
correctly positioned when the flat edges surrounding it are parallel with the
edges of the hole at the bottom of the base.
3. Once the adaptor is correctly slotted into the base, sit the unit on the charging
base with its underside facing the wall, so that the charging jack at the back
of the unit is aligned with the charging pin at the bottom of the base. If the
vacuum cleaner is correctly positioned, the pin should automatically slot into
the charging jack.
4. The LED indicator on the body of the charger will light up red to show the
unit is charging, and go out when the unit is fully charged’ to read ‘The LED
indicator on the body of the charger will light up red to show the unit is
charging, and turn to green when the unit is fully charged
5. If the unit does not charge, make sure the vacuum is correctly positioned
within the charging base and that the charging pin is slotted into the charging
jack.
6. Alternatively, you can charge the vacuum cleaner directly from the mains. To
do this, plug the mains adaptor directly into the corresponding jack at the
back of the unit, and plug the other end of the adaptor into an active mains
socket.
Note: The average charging time for this unit is 3-4 hours.
4 - Before First Use
Loading ...
Loading ...
Loading ...