Loading ...
Loading ...
Loading ...
7
ENG
3. Connect to antenna
4. Turning TV ON
TURNING TV OFF
a. Connect an antenna cable (not supplied) via the ‘RF’ input port at the back of the TV.
b. Ensure the antenna cable is also connected to a working antenna, either via an antenna wall socket in your
home, or directly.
Plug the power cord into a suitable power outlet, then press the POWER (
) button on the remote control,
making sure to aim it at the sensor at the front of the TV. Alternatively, you can press the power button on the lower
side of the back panel on the TV.
Press the POWER (
) button on the remote control to enter standby mode. To power down the TV completely,
unplug the power cord from the power outlet.
Do not leave your set in standby mode for long periods of time. If you will not use the TV for a long time, it is
recommended to unplug the set from both the power outlet and aerial.
Antenna
wall socket
Antenna cable
(not supplied)
Loading ...
Loading ...
Loading ...