Loading ...
Loading ...
Loading ...
Clean your air conditioner occasionally to
keep it looking new. Be sure to unplug the
unit before cleaning to prevent shock or fire
hazards.
The Dust filter should be checked at least
once a month to see if cleaning is necessary.
Trapped particles in the Dust filter can build
up and cause an accumulation of frost on the
cooling coils.
NOTE: When replacing the Dust filter after
cleaning, make sure the tabs on the air filter
are on the upper part of filter, and placed
outward as shown in the drawing on the left
side.
Dust Filter Cleaning
• Push the vent handle to the Vent Closed
position(where applicable).
• Open the front panel.
• Grasp the Dust filter by the center and pull
up and out.
• Wash the Dust filter using liquid
dishwashing detergent and warm water.
Rinse Dust filter thoroughly. Gently shake
excess water from the Dust filter. Be sure
Dust filter is thoroughly dry before
replacing.
• Or instead of washing, you may vacuum the
Dust filter clean.
Dust Filter
Tab
21CARE AND CLEANING
Cabinet Cleaning
• Be sure to unplug the air conditioner to
prevent shock or fire hazard. The cabinet
and front may be dusted with an oil-free
cloth or washed with a cloth dampened in a
solution of warm water and mild liquid
dishwashing detergent. Rinse thoroughly
and wipe dry.
• Never use harsh cleaners, wax or polish on
the cabinet front.
• Be sure to wring excess water from the
cloth before wiping around the controls.
Excess water in or around the controls may
cause damage to the air conditioner.
PUREAIR
TM
FILTER(sold separately):
This unit has available space for use with a
PureAir
TM
Filters (sold separately). Dierent
types of PureAir
TM
Filters can be purchased
by scanning the QR code behind the air inlet
grille, by visiting Frigidaire.com, or by calling
Frigidaire Customer Service Center
1-800-944-9044(US) / 1-800-265-8352
(Canada).
To install the PureAir
TM
Filter:
1. Remove the Dust filter as instructed in the
Dust filter cleaning section.
2. Insert the PureAir
TM
filter in the reserved
space behind the Dust filter as shown
below.
The PureAir
TM
filter should be replace with a
new one after its service life is reached.
To remove the filter grape the tab on the left
upper corner and pull out.
Note: If the PureAir
TM
filter is installed
properly the PureAir
TM
Filter indicator will
glow white. Otherwise reinstall the filter.
3. Reinstall the Dust filter and air inlet grille.
Loading ...
Loading ...
Loading ...