Loading ...
Loading ...
Loading ...
7
INSTALLATION
Installing the Range Hood
• Determind how high you want to install your range
hood above the stove top and draw a horizontal line
with a pencil. 24" to 30" Height is recommended.
The following steps requires 2 or more people:
• Remove the
Baffle Filters
to reduce the weight for
installation.
• Raise the
Hood Body
so that the bottom of the
Body
is leveled with the pencil line.
• Mark the locations of the
Hanging Holes
on the
wall with a pencil.
• Put down the
Hood Body
, align the screws with the
marked locations and drive them into the wall, with
a small portion of the screws remain outside of the
wall.
• Raise the
Hood Body
and hang it onto the screws
on the wall.
• Align and install the
Top Bar
close to the
Ceiling
.
Make sure that the
Top Bar
is inline with the bottom
half of the
Chimney
and its height isn't exceeding
the maximum height of the
Chimney
.
• Connect the Duct to the Adaptor on the Hood Body
and seal the connection with foil tape or duct tape.
• Install the
bottom half of the Chimney
to the
Hood
Body
.
• Insert the top half of the
Chimney
into the bottom
half.
• Extend the top half of the
Chimney
till it reaches the
Top Bar
.
• Install the top half of the
Chimney
to the
Top Bar
with
2 screws
each on the
left and right sides of
the Chimney
.
Top Bar
Hanging Holes
Hang the Hood onto the Screws
Loading ...
Loading ...
Loading ...