Loading ...
Loading ...
Loading ...
v
2.7 Avoid moisture and dust
In order to avoid the damage of camera, do not set the camera in the place with lampblack, water vapor,
high temperature or too much dust.
2.8 Avoid high temperature
Do not install the camera close to the heating furnace or other heat source, such as spotlight; the
temperature may rise very high if the camera is installed in the ceiling, kitchen or near the boiler room.
2.9 Cleaning
Wipe off the dirt on the shell with soft cloth. Remove dirt by using soft cloth dipped with detergent and
wipe after being twisted dry, then wipe again with dry soft cloth. Do not use gasoline, paint thinner or
other chemicals to clean the shell or it may cause deformation and paint peeling off. Be sure to read the
user’s manual when using chemical cloth. Do not let the camera shell be close to plastic and rubber
material for a long time or it may cause damage and paint peeling off.
3 Installation preparation
3.1 Basic requirements
All the electrical work must comply with the use of the latest electrical regulations, fire prevention
regulations and related laws and regulations；check if all the accessories are complete according to the
packing list, make sure if the application and installation of the PTZ are consistent with the requirement,
if not, please contact the supplier; please use the product according to the requirement of the working
environment.
3.2 Check installation space and the strength of the installation site construction
Make sure there is enough space for the product and installation structure in the installation site. Make
sure the wall of installing PTZ and the bracket’s carrying capacity must support the total weight of the
PTZ and other installation structural parts. It requires four times of safety factor.
3.3 Please save all the packaging materials of the PTZ
Please keep the original packaging materials properly after unpacking the PTZ so that when there is any
problem coming up, send the PTZ to the agent or factory with its original packaging materials. The non-
original packaging materials may cause accidental damage during transportation and result in extra cost.
4 Special announcement
The actual product may have tiny difference with the model described in the manual which is just for
reference.
The products update frequently, there will be no prior notice if there is any upgrade.
Please contact the customer service of the company for the latest program and supplementary
documentation.
The manual is for reference with several models, the specific operation for each product will not be
enumerated; please operate according to the actual product.
We’ve tried our best to ensure the content in the manual complete and accurate, but there may be
some deviation with the actual value for some data. The company’s final explanation shall prevail if
there is any question or dispute.
Loading ...
Loading ...
Loading ...