Loading ...
Loading ...
3
Tools and Parts
Parts supplied
Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
WARNING!
Remove the protective lm covering the product before putting
into operation.
Part Qty
Hood assembly and LED lamps already installed
1
Duct covers
2
Torx 10 adapter
1
10x60 mm wall anchors
4
8x40 mm wall anchors
2
5.4x75 mm
4
5x45 mm
6
3.5x9.5 mm
2
4x8 mm
2
6” round air transition
1
Duct cover bracket
1
Mounting template
1
Tools/Materials required
• Level
• Drill with 1¼” (3.0 cm),
1
⁄8” (3.0 mm), and
1
⁄16” (4,8 mm) drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Metal snips
• Screwdriver
- Phillips screwdriver
- Flat-blade
Parts needed
• Home power supply cable
• ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
For vented installations, you will also need:
• 1 wall or roof cap
• Metal vent system
Parts not supplied
Optional Accessories
Kit # Part Kit # Part
CFM Reduction
Kit
KIT02748
Recirculating
Kit
KIT02766
KIT02721A
Long Chimney
Extension Kit
(9´ to 12´
Ceiling)
KIT02762
6" Round
Backdraft
Damper Kit
KIT0102873
Loading ...
Loading ...
Loading ...