Loading ...
Loading ...
Loading ...
CUEMIX FX
80
Output channel focus
Click the channel focus button (Figure 9-6) to view
and edit parameters in the channel settings section
of the CueMix FX window (Figure 9-7 on page 81).
Channel focus also determines which channels are
being scoped by CueMix’s audio analysis tools, as
explained in “Choosing channels for audio
analysis” on page 99.
Output EQ and Dynamics
The EQ/Dynamics section in the Outputs tab
(Figure 9-6) works identically to the EQ/Dynamics
section for the Inputs tab (Figure 9-3). See “Input
EQ and dynamics” on page 78.
Output reverb send/return
The output reverb send (Figure 9-6) feeds the
signal for the output to the 896mk3’s global reverb
processor, where it is merged with any other signals
being fed to the reverb. The reverb’s output can
then be fed back into the mixer at various return
points, including the same output from which it
was sent (discussed below). The output reverb
send is disabled (grayed out) when the reverb Split
Point is set to Mix to eliminate the possibility for
feedback loops created by reverb send/return
loops. See “Split point” on page 94.
The output reverb return (Figure 9-6) feeds the
output of the 896mk3’s global reverb processor
directly to the output. This includes any other
signals currently being fed to the reverb.
Both the send and return occur after EQ and
dynamics, but before listenback and talkback.
Talkback/Listenback
Click the Ta l k b a c k or Listenback buttons
(Figure 9-6) to toggle whether the output pair is
included in the Talkback or Listenback group. See
“Talkback and listenback” on page 96.
Monitor group assign
Click the Monitor buttons (Figure 9-6) to toggle
whether the output pair is included in the Monitor
group. See “The Monitor Group” on page 95.
Figure 9-6: The Outputs tab.
Output name
Channel focus
Outputs tab
EQ band selectors
LP/HP filter selector
Compressor selector
EQ/Dynamics graph
EQ/Dynamics controls
EQ/Dynamics
enable/disable
Output reverb
send/return
Talkback/listenback
enable/disable
Monitor group assign
Loading ...
Loading ...
Loading ...