Loading ...
Loading ...
Loading ...
BISSELL.com 7
1. Press the power button to
begin cleaning and to turn OFF
the machine when finished.
2. Press the cleaning mode button to toggle between the
three settings.
•• High For cleaning carpet and area rugs. This mode balances
power and provides a run time of up to 18 minutes. This is the
default mode when the vacuum is turned ON.
••• Turbo For maximum suction. This mode is active for
5 minutes and then will default back to high power mode.
• Low For hard floors. Offers the quietest sound with longest run
time of up to 50 minutes.
Note: If your vacuum is difficult to push on carpet or is shutting
off abruptly, try reducing the power setting.
Note: All batteries differ when it comes to run time and power production. The cleaning mode
you choose and the surfaces you vacuum (long, thick carpet uses more power than short, low pile
carpet) affect run time and power produced. To better preserve run time and overall battery life,
use the power mode best suited to your cleaning task and only use TURBO mode when you need an
additional boost of suction power.
Using the Vacuum
Looking for more guidance? Go to support.BISSELL.com for tips and 24-7 support while
cleaning.
Using the Parking Brake
Go to support.BISSELL.com for additional how-to videos.
ICONpet® Turbo can be used as a stick vacuum, hand vacuum or for extended reach with hand
vacuum + wand.
WARNING Do not use your vacuum until you are familiar with all instructions and operating procedures.
The parking brake helps prevent the wheels from sliding when the machine is leaning against a wall.
1. To lock the wheels, push the
brake away from the brush roll.
2. Lean the machine against a
wall for temporary storage.
3. To disengage, pull the brake
toward the brush roll.
Loading ...
Loading ...
Loading ...