Loading ...
Loading ...
Loading ...
Faults and what to do about them en
47
Water leaks from the
bottomof the appli-
ance.
Supply hose screw connection isleaking. Tighten the screw connection.
Drain hose is leaking. Have the Drain hose replaced by
theafter-sales service.
Foam escapes
from detergent drawer.
Too much detergent has been used. Only use detergent which is correct
for textiles, and suitable for use in
automatic washing machines. Make
sure that you use the correct dos-
age.
Several attempts to
start spinning.
Not a fault.The unbalanced load detec-
tion system attempts to redistribute an
unbalanced load by starting to spin sev-
eral times.
Always wash large and small items
together.
Washing results not-
satisfactory.
Uncleaned areas worse than expected.. s(Prewash)
Pretreat stains if necessary.
Too little or incorrect detergent used. Use the correct dosage of a suitable
detergent, in accordance with the
manufacturer's instructions.
Maximum load exceeded. Select the load appropriate for the
programme.
Detergent residues on
the washing.
Some phosphate-free detergentscon-
tain water-insoluble residues whichap-
pear on washing as light specks.
Rinse the laundry again or change to
using liquid detergent. Brush the
laundry after it has dried.
Grey residues on the
washing.
Soiling caused by ointments, grease
oroil.
Wash the laundry using the maxi-
mumdetergent dosage and the maxi-
mumpermissible temperature – see
thecare label.
Programme termi-
nated unexpectedly.
Press the Start/Pause I button
elected accidentally.
Turn on the tap.
Drying result
notsatisfactory.
The laundry clings to the sides of the-
drum after being spun
Loosen up the laundry by hand; start
the drying programme.
Closed tap Turn on the tap
Selected drying time too short Select the drying time according to
the Load.
Maximum or minimum load not taken
into account
Once the programme has ended:
adjust the load quantity, select a suit-
able drying programme and restart.
Spinning during
drying.
No fault "Thermo spin", which is for energy-
efficient drying, starts after a drying
time of approx. 10 minutes.
Fault Possible cause Remedial Action
Loading ...
Loading ...
Loading ...