Loading ...
Loading ...
Loading ...
Installation Instructions
INSTALLING THE REFRIGERATOR(CONT.}
14"]PUT THE REFRIGERATOR IN PLACE
Hove the refrigerator to its final locatio_
[] LEVEL THE REFRIGERATOR
The refrigerator can be leveled bg adjusting
the rollers located near the bottom hinges.
B
Raise
Rollers have threepurposes:
• Rollersadjust so the door closes easilg when
opened about halfwag, (Raisethe front about
5/8" [!6 mm] from the floor.)
• Rollersadjust so the refrigerator is firmlg
positioned on the floor and does not wobble.
• Rollersallow gou to move the refrigerator
awag from the wall for cleaning.
To adjust the rollers on 23' (33" wide}, 25', 26',
27' and 29' models:
Turn the roller
adjusting screws
clockwise to raise
the refrigerator,
counterclockwise
to lower it. Use
a 3/8" hex socket
or wrench, or an
adjustable wrench,
Roller adjusting screw
[] LEVEL THE REFRIGERATOR (cont.}
To adjust
the rollers on 23'/25'
CustomStgle T"models:
Turn the front roller
adjusting screws
clockwise to raise
the refrigerator,
counterclockwise Roller adjusting screws
to lower it. Use a 3/8"
hex wrench with extension, or an adjustable
wrench.
These models also have rear adjustable rollers
so gou can align the refrigerator with gour
kitchen cabinets. Use a 3/8" hex wrench with
extension to turn the screws for the rear rollers-
clockwise to raise the refrigerator,
counterclockwise to lower it.
[] LEVEL THE DOORS
Adjust the refrigerator door to make the doors
even at the top,
[]
To align:
Using a 7/!6" wrench, turn the door adjusting
screw to the right to raise the door, to the left
to lower it.
[]
NOTE:
A nglon plug, imbedded in the threads
of the pin, prevents the pin from turning
unless a wrench is used.
After one or two turns of the wrench, open
and close the refrigerator door and check
the alignment at the top of the doors.
Doors should be even at top
3O
Loading ...
Loading ...
Loading ...